Even though your iPhone has lots of other applications besides calling, many of them don’t work until you activate your iPhone: You must connect the phone to a cellular network through your cellular service provider; and, if it’s a GSM phone, you must install a SIM card.
Connect to a cellular network
How to unlock Activation Lock iPhone 6 it's a best way to unlock activation lock icloud 2020 With Some Models Apple iPhone Works in The Method With Success P. May 08, 2020 Step #1 – Download and install Tenorshare 4uKey on computer. Then connect iPhone 6 using the appropriate lightning cable and launch the program to continue. Step #2 – From the main menu, click on “Unlock Apple ID”. Step #3 – Unlock iPhone and tap on “Trust”.
You can purchase an iPhone with a cellular network contract or without a contract, which is called an unlocked iPhone — not to be confused with the Unlocked/Wake mode. Here’s the difference:
-
Contract: iPhone is activated when you sign up for a service plan with an iPhone service. In the U.S., your cellular network carrier choices are AT&T, which uses the GSM cellular communications protocol; Verizon; and Sprint, which use the CDMA (Code Division Multiple Access) cellular communications protocol.
You register your phone with the network and pick a plan for the calling minutes, text messages, and Internet service usage you want.
-
Unlocked: iPhone 5 or later arrives without a nano-SIM (that’s the little chip inside that gives you access to the cellular network), while iPhone 4 and 4s have a micro-SIM, which is a bit smaller than a normal SIM and a bit bigger than the nano-SIM.
You purchase a nano-SIM from a service provider and then purchase prepaid calling minutes in a pay-as-you-go option. Cellular broadband Internet access may be sold separately or bundled with the calling minutes and text message allotment. You can use an unlocked iPhone with a contract; in that case, you bought your iPhone outright so the monthly contract should be less than iPhone plus a cellular service fee.
T-Mobile provides national pay-as-you-go service and about 30 regional carriers offer pay-as-you-go service. Unlocked iPhones work only with carriers who use the GSM cellular communications standard (AT&T and T-Mobile in the U.S.).
If you spend a lot of time overseas, say in France, you can purchase a prepaid SIM in France, which you put in your iPhone when you’re there. When you’re in the U.S., you put the U.S.-based SIM in your iPhone.
How to insert a nano-SIM card
If you bought an unlocked phone, you must purchase and insert a GSM nano-SIM. GSM (Global System for Mobile Communications) is the cellular service that’s available in Europe and lots of other places around the world.
To insert the nano-SIM, do the following:
-
Insert the end of a paper clip into the hole on the SIM card tray on the right side of your iPhone.
The SIM card tray pops open.
-
Place the SIM card in the tray, matching the cut corner of the SIM card to the cut corner in the tray.
-
Push the SIM card tray closed, and you’re done.
Working with the Setup Assistant
When you turn on your iPhone for the first time, the Setup Assistant takes you through a series of screens where you type in the requested information or choose from a list and tap Next or Done.
You have to have a Wi-Fi or cellular network data connection to complete activation; otherwise, you must connect your iPhone to your computer with the USB connector cable. The Setup Assistant asks for the following information:
-
Language: Tap your selection in the list.
-
Country: Tap your selection in the list.
-
Wi-Fi network: A list of available Wi-Fi networks appears. Click the one you use and type in the password. If Wi-Fi is unavailable, you can connect your iPhone to your computer with the USB to Dock connector cable and choose Connect to iTunes.
-
Location Services: It is recommended that you choose Enable Location Services, which lets various iPhone apps such as Maps and Reminders to use your location to better perform operations.
-
Set Up iPhone: If this is your first iPhone, you can choose Set Up as New iPhone or you can restore from a backup of your iPad or iPod touch, which puts your apps, data, and media on your iPhone.
If you are moving from an older iPhone to a newer model, first backup your old phone and then choose Restore from iCloud Backup or Restore from iTunes Backup (whichever you use).
-
Sign in or create an Apple ID: Although you can choose to skip this step, your Apple ID lets you
Store your iPhone backup on iCloud (Apple’s remote storage site).
Make purchases from the iTunes Store and the App Store.
Sign in to FaceTime.
-
If you have separate Apple IDs for iTunes and iCloud, follow the onscreen instructions to sign in to both. iCloud requires ID with an e-mail format, such as babsboyd@icloud.com, so you may have to create a new account to activate iCloud.
The Setup Assistant asks you to create an ID and password and set up a security question — a question only you know the answer to that Apple asks if you forget your password or if you call for customer service and the technician wants to verify your identity.
-
Set Up Touch ID (iPhone 5S): Tap Set Up Now to go through the process that allows an iPhone 5s to memorize your fingerprint. (Tap Set Up Later if you prefer to postpone this action.) After setting up Touch ID, touching the Home button unlocks your iPhone and can also be used in place of your Apple ID password to authorize purchases.
-
iTunes Store Sign in: Type your Apple ID and password and Agree to the Terms and Conditions when asked.
-
iCloud Set up: You can choose to use iCloud or decline and then set up iCloud later.
-
Messaging: Choose which phone number and e-mail address other people can use to reach you on iMessage, iPhone’s text messaging service, and FaceTime, iPhone’s audio and video calling service that uses cellular data or Wi-Fi.
-
Diagnostics: It is recommended you choose Automatically Send. Tap Start Using iPhone after you complete the setup procedure.
If your iPhone requests you to enter iCloud credentials when you try to reset it, then it's activation locked. While the feature intended to prevent others to access your iPhone, this feature has also caused problems for iPhone users who are looking to be able to use their device legitimately.
Many unsuspecting users have purchased their iPhone 6 devices off of a market place, like eBay, only to discover that they can't use them due to activation lock. If you have an older iPhone with activation lock enabled, you may be wondering how to bypass the activation lock on iPhone 6 with a dial pad? Can it be done?
How to Bypass Activation Lock on iPhone 6/6S Plus with Dial Pad
On the activation lock screen, there is still the option to call an emergency number. This capability has led inquisitive minds to question: 'can you bypass activation on iPhone by calling a number?' It might seem plausible that Apple would have put in some secret code to bypass the activation lock.
The answer to that question is more complicated than a simple yes or no. On iOS 12.1.4, there is a method for how to bypass activation lock on iPhone 6s Plus with an emergency dialer. To avoid the activation lock screen, please try the following steps.
Step 1. Turn on your iPhone 6, if you haven't powered it on already. Choose your language and region.
Step 2. You should see the iCloud activation screen. Tap the home button 3 times to turn on 'Voice Commands' and tap 3 times to turn it off.
Step 3. Go back to the initial screen by tapping the back button.
Step 4. Tap on the home button and then choose 'Start Over'.
Step 5. Tap on the home button and choose 'Emergency Calls'.
Step 6. In the emergency call screen, dial the following code (please make sure that you get it right!) '*#96274825*0000*1#' and tap on the 'Call button' approximately 10 to 15 times.
Step 7. Now, increment the last digit by one. In this case, one becomes two. Again, you will need to tap on the 'Call button' 10-15 times.
Step 8. Repeat this process, incrementing the last digit from 1 to 9. Then, do this once more and type 0.
Step 9. Tap the 'Back button' to go to the start screen. And choose your language and region once more. The bypass screen on your iPhone 6 should appear.
Step 10. Now you get to choose your passcode and follow the steps like normal!
Note
This method works on iOS 12.1.4. Therefore, if you find that this method does not work on your device, the previous owner may have updated it. With that said, if you'd like to know how to bypass activation lock on iPhone 6 with a dial pad, it seems like this is a natural, free method to try! Worst case scenario, you'll have to unlock it some other way.
How to Bypass iPhone 6/6S Plus Activation Lock without Dial Pad
The method above may not work for most versions on iPhone 6/6S Plus and other models of devices. If that's the case, there isn’t another option for how to bypass the activation lock on iPhone 6 with the dial pad. However, hope is not lost. You can remove the activation lock through some other methods that don't involve the dial pad! Here are 2 ways, plus some frequently asked questions.
1 Use iMyFone iBypasser to Bypass Activation Lock on iPhone
The easiest, most intuitive method for removing the activation lock on iPhone is to use iMyFone iBypasser. This excellent software bypasses the activation lock on your iPhone without requiring any technical knowledge. Unlike dial pad, most versions of iPhone models are supported to bypass activation lock. With just a few steps, you can normally use your iPhone and not stare at the activation lock screen.
Top features of iMyFone iBypasser
- Bypass the activation lock on iPhone 6/6S Plus and other models without dial pad and password.
- Log in a new Apple ID to get access to your iPhone after bypassing activation lock.
- Get rid of being tracked by the previous owner when bypassing activation lock successfully.
- Support most devices and iOS versions, including the latest iOS 13.
Bypassing the activation lock screen on iPhone 6 with iMyFone iBypasser is easy. Follow the steps below.
Step 1.Download, install, and launch iMyFone iBypasser. Click 'Start' to bypass the activation lock.
Step 2.Connect your iOS device to your computer.
Step 3.Once the application recognizes your iPhone 6, a jailbreak package will be downloaded on your iPhone. Click on 'Start Jailbreak' button and follow the instructions to jailbreak your device.
Step 4.Tap 'Start Bypass' after the jailbreak is done and confirming the device information. The program will start bypassing the iCloud activation lock.
Step 5.Once you see the success page, the activation lock on iPhone 6 will be gone!
As you can see, using iMyFone iBypasser is one of the best ways to bypass the activation lock. The product's reviews reflect its high reliability and ease-of-use. Many customers are delighted with iMyFone iBypasser as it removes the activation lock screen with minimal effort!
2 Try iCloud DNS to Bypass iPhone 6 Activation Lock (Temporarily Work)
The entire activation lock mechanism works through the internet, and when you boot your iPhone 6, some code in iOS pings Apple's servers to see the activation status of the device. The theory behind this bypass method is that if you can prevent the device from connecting to Apple's servers or if you can spoof the response, you might be able to 'trick' your device into thinking it's active.
Unfortunately, you cannot spoof the response. Various security mechanisms make that nearly impossible. However, what you can do is change your DNS servers to connect you to a wifi portal. This portal will let you use the web browsing feature of your phone while you explore better solutions. Note this solution only works with iOS versions below 10.
To use this capability, please follow these steps to bypass iPhone 6 activation lock.
Step 1. Start your iPhone 6. And select your country and language.
Step 2. The next screen will prompt you to connect to a wifi network. Don't connect. Instead, click on the 'i' symbol next to the name.
Step 3. Scroll down to the DNS section and tap on 'Configure DNS'.
Step 4. Select 'Manual'. Enter your new DNS IP address (listed below). Then remove the old DNS server.
The DNS servers are:
- USA: 104.154.51.7
- Europe: 104.155.28.90
- Asia: 104.155.220.58
- South America: 35.199.88.219
- Australia and Oceania: 35.189.47.23
Step 5. Go back to the wifi selection screen and tap your wireless network to connect.
Step 6. You'll see an iCloud activation screen. Tap on the 'back' link in the upper left corner.
Step 7. Your browser will redirect you to the iCloud bypass page!
Limitations of DNS
As mentioned earlier, this method has some limitations. You cannot use it for any iOS versions after version 10. You cannot use your device fully (this method only works for simple browsing, videos, and so on). Otherwise, you can use the best bypass tool to remove activation lock.
FAQs about Bypassing Activation Lock on iPhone
It's an understandably complex topic when looking at how to bypass activation lock on iPhone 6 with a dial pad. Therefore, we've compiled a list of FAQs to help make it easier.
Q1. What's the difference between the iCloud activation lock and SIM lock?
When looking into this topic, you might have seen the terms iCloud and SIM lock. These are very different types of locks. A SIM lock is one that the previous owner initiates with their carrier. This lock prevents someone from using the SIM. The activation lock is with Apple. This lock is a safety feature that Apple put in place.
If your iPhone has a SIM lock, all you need to do is replace the SIM. If your iPhone has an activation lock, then you need to follow one of the steps above.
Q2. How can I know if my device is activation locked or not?
Knowing if you have the activation lock is trivial. You can follow the steps.
- Power on your device. Enter your language and region.
- If you see a screen asking you to enter your email and password to unlock the device, then it is activation locked.
- If you don't see this screen, then you do not have an activation locked device.
Q3. Can I bypass the iCloud activation lock with the restore capability?
Network Unlock Iphone 6 Free
No. The activation lock will appear irrespective of what the phone's data has on it. Initiating a restore won't change the lock status.
Q4. Does an iOS Lock Screen Removal software remove the iCloud activation lock?
No. The lock screen and activation lock are two very different things. The lock screen is local, whereas Apple's servers control the activation lock.
How To Unlock Activation Lock Iphone 6 With Computer
Conclusion
Ultimately, you no longer need to wonder about how to bypass the activation lock on iPhone 6 with the dial pad. It's possible to do it! Try the first method above with the emergency call code. If that doesn't work, then your best bet is to use iMyFone iBypasser. It is the most natural, most straightforward solution available. It works with most iOS versions and most devices. Now start using your device today with iMyFone iBypasser!